Please select your local language and country; once selected you will see relevant products, special offers and information appropriate to your country.

    Change country/language

FP5018 0.88Hp
220-240v 50Hz

Compact Fan



At Gibbons Fans safety is very important to us. To ensure that our products are the safest available in the market we ensure compliance to international safety standards.

To achieve this we work closely with some of the world’s most highly regarded and stringent test houses to ensure full compliance to these standards.

Which marks can we display on our products?

CE Logo   All our products carry the CE mark. This means that as a manufacturer we are declaring that our products meet the requirements of the applicable EC directives.

TUV Logo   To ensure compliance to the EC directives we use the German test house TUV to certify that our products meet the applicable directives and are safe to use. We are the only blower manufacturer that ensures our blowers are suitable for outdoor use and IP rated to IP44.

GS Logo   Our products which carry the GS mark have been through a thorough testing procedure undertaken by the TUV. As well as our products being stringently tested our production facility is also audited annually ensuring quality assurance and conformance. Again Gibbons Fans is the only manufacturer which has achieved this accreditation.

ROHS Logo   RoHs is a legal requirement in the EC which ensures which restricts the use of certain hazardous substances in electrical and electronic equipment.  At Gibbons Fans we have had our products tested to ensure compliance with this standard, to protect both our customers and the environment.

CSA Logo   Our CSA C and US marks mean that our products have been tested by the CSA to ensure compliance to the Canadian (CSA) safety standards and the US (UL) safety standards. We have also gone a step further than other blower manufacturers ensuring that our fans are safe to use outside.

Should you have any questions on our safety marks or standards please fill in our contact form.

Inc VAT €204.00
Ex VAT €170.00

Will I pay VAT?

Will I Pay Sales Tax / VAT

European (Including the UK)

Tax Registered

If you have a valid European (EU) tax / VAT number then sales tax will not be added to your order**.

Not Tax Registered

If you do NOT have a valid European (EU) tax / VAT number then sales tax will be added to your order.

**All orders delivered to the Netherlands are subject to Sales Tax / VAT.

Non European

If you are based outside of the EU then sales tax will not be added to your order.
Should you have any questions relating to the application of sales tax, please contact a member of our team who will be happy to help you.

Plug Type, Voltage and Frequency

Here at Gibbons Fans you can purchase products with different plug options. You may be confused as to which is the correct type for you to use to suit the electrical supply of the country where the blower will be used.

This may be because you are sending a product to a country which is different to your own.

The table below advises: The plug type, the voltage and the frequency for each country in the world, to make things simpler we have divided the word up into regions, so please select your region then find your country within your selected region.

Please note that this table is only meant as a guide, we strongly recommend that if you are unsure you check with the customer or a qualified person. Gibbons Fans Ltd cannot accept responsibility for any loss or damage resulting from incorrect plug, voltage or frequency selection.

Gibbons Fans can supply the following plugs with your inflatable fan:





 Australian Plug


 UK Plug

 USA Plug

Download Plug Options PDF

We offer bulk discounts if you
are buying more than 5 items

Enquire about bulk discounts

Image of FP5018 0.88Hp


Low Noise, High Efficiency 680W Compact Fan for Small Commercial Inflatables:

Gibbons Fans increasingly popular compact fan range is the perfect solution for smaller commercial bouncy castles and inflatables.

Providing an impressive amount of pressure and volume from a small form factor this fan is perfectly suited to smaller commercial inflatables, start line arches and larger promotional inflatables.

The injection moulded, impact resistant casing results in a lightweight blower which takes up minimum space during transportation.

The FP 5018 compact fan range is exceptionally safe and complies to all relevant safety standards.

High Performance, Lightweight, Cost Effective

  • High performance from a compact design
  • Great choice for smaller commercial inflatables
  • CE, TUV, GS and IP 44 approved
  • Hugely cost effective
  • Low Noise


Usage Promotional, Home Use Inflatable Fans, Bouncy Castle Fans
Material Injection Moulded High Impact ABS
Rated input power 0.83kW
Rated ouput power 0.66kW
Horsepower 0.88Hp
Motor type TEFC
Motor phase AC
Voltage 220-240v
Frequency 50Hz
Starting current 8.72A
Max running current 3.61A
Capacitor type 12µF
Insulation class E
Maximum motor speed 2850 rpm
Performance @ 4"wg 525 cfm
Performance @ 1000 pa 1334 m3/hr
IP rating motor 44
IP rating fan 44
Weight 8.7Kg / 19.2lbs
Product dimensions 26cm x 40cm x 40cm / 10.218'' x 15.72'' x 15.72''
Packaging dimensions 36.5cm x 43.5cm x 47cm / 14.3445'' x 17.0955'' x 18.471''
Plug type CEE Form Plug, 2P+E, 16A
Decibel level @ 5M 84dBA
Power supply Single Phase
Casing type Plastic
Inflatable size Up to 4M x 4M (12ft x 12ft) would like to store information (cookies) on your computer. By continuing to use this site, you consent to this.
More info